64phil

I decided to take the old tank out now rather than later even though it may be years before final installation . The new tank definately has had the pipe installed at an angle. Photos below show new and old so you can see what I mean. So, I took the new tank (with bubble wrap still in place so as not to scratch) and jacked it up into position. There does seem to be enough clearance between the frame rails to install the tank as is (see photos below). Once I remove the bubble wrap the open end of the pipe will slip up into position. Considering that I am in Ontario, Canada and the tank came from California I think I'll suck it up and avoid the border hastle again.

Phil