|
If armor coating is the same as ceramic coating then the headers won't get as hot as uncoated stainless steel or chrome headers. Therefore changing the ignition wires are not necessary. If the factory wires can withstand the heat from the factory headers then they will definitely withstand the heat from coated heaters. Even thought the factory headers have the heat shields on them they still produce a large amount of heat. If you decide to change the wires anyway like I did when I installed my ceramic coated shorties, you can get a set of MSD wires that will work just fine.
Last edited by 6QTS11OZ : 03-30-2008 at 11:44 PM.
|
