|
The cover on the back may have a tag. If you remove the cover there should be a # on the outside edge of the ring gear that will give the ratio. Or you could count the # of teeth in both the ring gear and the pinion and divide the pinion by the ring gear.
Or like I suggested above, jack up the rear end off the ground, turn the tires over one full revolution (if it`s a posi unit) and count the # of times the drive shaft turns over and that`s your ratio. If you have a 3.31 then the drive shaft will turn over 3 and almost a half revolutions for every time the tire turn over once.
|
