Quote:
Originally Posted by PDQ GTO
I would just get your stocker ported and polished. I got mine done for $50, but the Tuner was also installing a cam and LT's so I got a brake on the price. $150 just seems a tad on the high side...
|
Really? Where is that because Ls2 portworks does it for $275 and some other place I looked was $300, and that was with an exchange manifold.
Quote:
|
Originally Posted by About the Process
Each intake requires about 3.5 hours from the first cut to the last cleaning step. All intakes are ported with air tools using various cutting bits and a two stage sanding process followed by a high speed polishing stage. All intakes are degreased and scrubbed and then fully cleaned with water before drying. Prior to packaging, all intakes are cleaned again with high pressure air to ensure a product that is ready to bolt on upon arrival.
|
