|
Input shaft may not be going into pilot bearing........CAREFULLY try drawing tranny in by LIGHTLY tightening the 4 bolts to the bell housing.....be careful not to snap off the 4 ears ( tapping the tranny with a rubber mallet or dead blow hammer may help. ALSO once the input shaft goes thru the clutch and the throw out bearing is on the slide collar you can lightly depress the clutch pedal. T this will help align the shaft, pressure plate, and input bushing.....KEY operative words here......LIGHTLY, CAREFULLY, SLOWLY....All the above have worked repeatedly for me.......E the A
|
