|
I wonder if someone didn`t do some MODing under there. The shocks should limit the rear axle downward movement and stop the axle from dropping down to allow the spring to be loose. Normally you would have to remove the shocks in order to get the axle assembly to drop down far enough to get the spring loose or out.
Could you maybe take a picture of the shocks and mounting points for the shocks? Also, could you measure the shocks collapsed and extended?
*EDIT*
I just had mine apart today and called NAPA, the shocks are the same between `65 and `67 W/O HD suspension. My shocks measure 12.5" collapsed and 20.5" extended.
Last edited by Rukee : 06-21-2008 at 12:13 PM.
|
