Originally Posted by Indy1K

Hi All,
Wanted to send along an update and let you know I have a great 15 year old mig welder. We had to cut out and grind down all the work the three stooges did on the chassis. The rear crossmember was welded in with 1/4" bar stock and out of alignment by more than an inch on the left and 1/2" on the right. Between the rust and the racing stress cracking, there wasnt much good steel on the left rail and crossmember joint. We cut new 3/16" plate and partnered them in. Joseph did most of the welding. Por 15 coat is on. Tomorrow we put on the chassis cote and start re assembly.
Some pics on the progress.