|
The gear is on the end of a holder that goes into the tranny at the tail housing. The speedo cable screws into it. Remove the cable, then remove the attaching nut (or bolt) that secures the gear holder to the tranny. The holder unit will pull straight out, though it may be tough to get out, try twisting or turning it to get it to let go. Once out there will be a removable plastic gear on the end, checking with your GM dealer and giving them your tire size and rear axle ratio they should be able to fix you up with a gear that will be closer then you have now. If the dealer can`t help you, check with some tranny shops in the area. You need an RPM gauge to be sure what you`re running at.
Last edited by Rukee : 07-31-2008 at 09:02 AM.
|
