|
Flywheel to Bell-Housing clearnaces
All
I haven't started the job, but want to ensure I have the right parts when I do. I've opted to mate an 11" clutch to the 421, and need a flywheel that will accommodate the larger clutch. The supplier sent me a 166 tooth flywheel with the engine. Does anyone know if this flywheel is compatible with a 1965 Bell Housing? If not, does anyone know of a 153 tooth flywheel drilled to accept either the 10.5 or 11" clutch?
The only gnashing of teeth I will tolerate during the installation is my own.......
Mike
|
Linear Mode
