So yesterday i decided to install my dougs header on the motor before i drop the body on the frame. The driver side went on fairly easy but the pass side gave me a hick up. It looked like it was hitting the frame slightly so i sliced off a small hump on top of the cross member. Second attempt still wasnt fittinguntill i took a closer look and realized it was hitting the motor mount not the frame. Sliced off the edges of the mount and walla fits like a glove. Stupid me i cut the frame for no reason. It was the size of a quarter and you wont se it anyway. So i got both header in and bolts snugged down thinking in done untill i attempt to put the motor mount bolts back in cause i lifted the motor for more room and realize i have to unbolt the header to put the bolts back in. So unbolt the headers slide in the mount bolts and put headers back on. Its always something that happens and its ussually my fault. After that was done my buddy wet sanded and polished the fire wall so i can marry the body and frame tonight. Fire wall came out beautifull. Very very happy with the color. Tonight after body is on ill start installing fuel systeme and decide were to run my lines and stuff.