Pontiac GTO Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,658 Posts
Discussion Starter · #6 ·
I got 'em from a friend as a sorta hook up.
But you can change them both out in less than 5 minutes. 2 philips head screws per lamp. Once you undo those, pull the lamp back twords you a little, then put your fingers on the farthest edge of the lamp (the thin edge that points to the side of the car) and gently "snap" it outward. Next just unhook your bulb sockets.

And in the immortal words of any CHILTONS guide, "Instalation is opposite of removal!":cool
 

·
Registered
Joined
·
1,658 Posts
Discussion Starter · #8 ·
Tsker79 said:
Pearl Jam, I've got an additional question on the removal of the lights. Does the trunk trim material have to be removed to get to the Phillips Head screws?
When you open the trunk, you will be able to see the screws right next to the lamps.
 

Attachments

1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top