Pontiac GTO Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
680 Posts
Discussion Starter #1 (Edited)
I need to find new door reveals for my 65' convertible. Unfortunately I damaged my drivers side when removing for paint. I cannot seem to find anything for a 65, but see 66+. (Nothing on AMES or OPGI)

Thanks in advance for your help!!!
 

·
Registered
Joined
·
898 Posts
Hi

I have a nice pair ...they came with a bunch of 65 stuff ....
could you send me the length of yours .... ?

I had a couple 66 67 trim in with 65 stuff I bought ... so I need a length from someone

I am a 68 69 guy so nothing to compare to here .... thanks

I will get mine out of the shed tomorrow and measure them also

Scott
 

·
Premium Member
Joined
·
680 Posts
Discussion Starter #3
Hi

I have a nice pair ...they came with a bunch of 65 stuff ....
could you send me the length of yours .... ?

I had a couple 66 67 trim in with 65 stuff I bought ... so I need a length from someone

I am a 68 69 guy so nothing to compare to here .... thanks

I will get mine out of the shed tomorrow and measure them also

Scott
Scott - The trim piece measures almost 45". I can send a picture as well if you'd like. Thanks !

Chris
 

·
Registered
Joined
·
898 Posts
trim

I dont know what year these are ....

I didnt mark em

they have a little recessed area about 2" in on one end .. a notch you might say .....

and they taper from 1.5" to 1" on top ...estimate ...

I have 2 taped together so the pistures are ugly

I will cut em apart and snap a few more pics later tonite I am kinda in a jurry to leave for dinner date

if they sound right or somebody knows chime in please

Scott
 

Attachments

·
Premium Member
Joined
·
680 Posts
Discussion Starter #5 (Edited)
I dont know what year these are ....

I didnt mark em

they have a little recessed area about 2" in on one end .. a notch you might say .....

and they taper from 1.5" to 1" on top ...estimate ...

I have 2 taped together so the pistures are ugly

I will cut em apart and snap a few more pics later tonite I am kinda in a jurry to leave for dinner date

if they sound right or somebody knows chime in please

Scott
Scott - I don't believe those match what was on my car, but might work....(I am assuming what was on my car was correct.) I'd LOVE more guidance / feedback from others with 65 convertibles....

Here is my passenger molding for reference.

Chris
 

Attachments

1 - 7 of 7 Posts
Top