Pontiac GTO Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter #1
I have titled this post as rebuild instead of restoration because there are too many non numbers matching parts and other mods. It is a post car documented to be 4-speed tri power, 3:55 posi. When I bought it the engine was a 1967 400, the trans a 1968 M20, and the rear end was out of a 1969 GTO. It is the nodular iron 4 pinion posi. It has the original tri power manifold and carbs. It is a total frame off project that will take me 3 years to finish. I began to take it apart this past January. These photos show the frame work to date.
 

Attachments

·
Registered
Joined
·
113 Posts
Discussion Starter #2
Photos

I had 5 pics but only one loaded because I think the others were too big. I will work on resizing them and try again.
 
1 - 6 of 6 Posts
Top