I have a 68 GTO with a stock 400 350 hp engine and it appears there are only 4 exhaust manifold bolts per side.The exhaust manifolds are drilled for 6 per side.I want to replace the exhaust manifold to cylinder head gaskets and am curious on the amount of bolts thanks
If it is the stock, non HO manifolds, then there are 6 bolts per side. Be careful on the torque. The HO manifolds use less, due to the casting thickness and size. Later cylinder heads that did not come on these cars originally are sometimes not drilled or equipped for the outside bolts to hold the manifolds on. Not an issue, since the manifolds are rigid and tend not to leak. Tubing headers will need all 6 bolt holes. What is the number cast on to the center exhaust port of the heads?
when engine is cold, put a bolt in there and see if there is a tapped hole.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Pontiac GTO Forum
514K posts
38.4K members
Since 2004
A forum community dedicated to Pontiac GTO owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance, history, and more!