Pontiac GTO Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter · #1 ·
Ok, that looks odd, let me rephrase,” questions about 47 heads, “

just tinkering today, so trying to clean engine, took valve Covers off and some thing looks askew, one rocker nut is a standard kind, rest have a locking internal nut with allen hole in , and there are. Pushrod guide plates, cannot find anything in the service manual about them, are they because of the different locking nuts? Or is it just normal??
Motor vehicle Automotive tire Gas Auto part Automotive wheel system
 

·
Registered
Joined
·
109 Posts
Discussion Starter · #4 ·
I actually have them on my lt1 in my jag, but they are on full roller rockers, had I seen them in standard rockers before, plus they are mix and match, removed other valve cover and only 3 are that kind, rest are stock
 

·
Registered
Joined
·
109 Posts
Discussion Starter · #7 ·
Engine is just a 350, nothing special, in a lemans, will be a cruiser, not a race car, did the performance thing on the lt1, heads, cam, intake throttle body, injectors, etc, this needs to be a bit more sedate, so the wife can drive it! :)
 
1 - 3 of 3 Posts
Top