Pontiac GTO Forum banner

1 - 1 of 1 Posts

8 Posts
Discussion Starter #1
I am removing the B&M shifter put in by the previous owner, and putting the original T handle back.
IIRC, there should be a metal mounting bracket attached to the front on the trans tunnel, that the front of the shifter mounts to.
There is nothing there right now.
The PO kinda made a mess of the tunnel when he put the B&M in there.:nono:
Right now, I can bolt the rear of the shifter down, but the front just hangs in the air.
Anyone have a pic of the trans tunnel where the shifter mounts, just to refresh my memory?
Maybe a pic of the shifter too, just so I can be sure the shifter is not missing something?

Thanks :patriot:
1 - 1 of 1 Posts