Pontiac GTO Forum banner

69 Crankshaft pulley setup

2K views 6 replies 4 participants last post by  Amerature Ed 
#1 ·
Hi all,

I have a small issue. I didn't take off the crankshaft pulleys so I don't know how they go back on the end of the crankshaft - actually how all three pieces including the reinforcement plate.

I mean: I have a before picture so I know the single pulley goes on the crankshaft first (behind the double pulley) but I don't know if the reinforcement plate goes between the pulleys or on the crankshaft. I can't seem to find an assembly diagram so any help would be much appreciated!

Thanks in advance, Dan



PS. I didn't paint them so don't hold the lousy paint job against me. i'll be stripping them back down for a repaint.
 
See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top