Pontiac GTO Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
949 Posts
Discussion Starter #1
Hi all,

When I pulled my 400 for a rebuild this fell off the car... it was not installed correctly as you can see from the bent portion in the second picture it should be straight - I'm slowly making it go back to the straight position, it was at 90 degrees. Since I did not see it before it fell off the frame rail I hope someone can show me a picture or tell me what the orientation of it is when on the car. I have not been able to find a picture or anything referring to it in my documentation(I.E. book of info, restoration guide etc).

Thanks in advance for any and all assistance, Dan



 
1 - 1 of 1 Posts
Top