Pontiac GTO Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
89 Posts
Discussion Starter #1
I am sure a silly question, but here goes. I just pulled out my AC going to put it on the shelf for awhile. There is an ac bracket that uses two head bolts noted in the pic. So I presume if I want to get rid of that bracket, I am going to have to order two regular head bolts? Thanks guys

140851
3E3258DA-EEC9-4C56-82E7-EB9208803987.jpeg
3E3258DA-EEC9-4C56-82E7-EB9208803987.jpeg
 

·
Registered
1967 400/400
Joined
·
451 Posts
I'm going through the same thing now. I have a thread up about it, about a month back. I just spent $100 for a head bolt kit.
 

·
Registered
Joined
·
1,267 Posts
correct
those 2 bolts are very tough to find when they get lost
as they are ac only length
I have spare non ac headbolts if needed
whats the foundry mark on yours
 

·
Premium Member
Joined
·
89 Posts
Discussion Starter #4
Ha. Well at least I feel better I am
not the only one. Thanks for sharing army. My appear slightly different- off a 64/65 set up. I’ll certainly put these away for safe keeping. Note the inner bolt has a stud on the end where the dipstick bracket for a 421 goes.

blkjudge if you have that first and second bolts I’ll def take them off your hands. I’ll PM you. Assume you don’t have that inner stud for dipstick? Let me know
 
1 - 4 of 4 Posts
Top