Pontiac GTO Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
210 Posts
Discussion Starter #1
I have American racing ar 767 currently not the prettiest rim. But I like it. Rear has 4.5 backspacing. Getting ready to install new suspension which in return will lower the car. I contacted American racing to see if they made the rim with a 6 inch back spacing but no response. Anyone know of an affordable 15 x 10 rim with that backspacing. I found basset racing, but they mention rim fatigue on their own site. Any info would be great.
 

·
Former Moderator
Joined
·
2,895 Posts
I run Weld Racing Pro Magnum 15x9 1/2" rims with 6" backspacing. They are two piece wheels with a variety of center designs and finishes available.

Why the 9 1/2" rim width? Because they fit perfectly without rubbing on my quarter panels (which I still rolled) with the tires I run, 12.5" wide M/T ET Streets.
 

·
Premium Member
Joined
·
210 Posts
Discussion Starter #3
Yeah we rolled the fenders was trying to fit 11inch m/t. With 6 inch I thought I could fit 12. I will look them up thanks
 
1 - 3 of 3 Posts
Top