Anyone Gone one solid drive shaft?
1 - 6 of 6 Posts
Joined
·
136 Posts
I'm actually getting the BMR heavy duty aluminum driveshaft (DS003) put in today, april 25, since my tranny's sitting in my trunk and i'm getting other stuff done (new clutch & shifter). I'm not going to use it for drag racing on a track, but I'll tell you how it feels.
Joined
·
136 Posts
BMR originally forgot to send me the rear yoke adapter. They finally sent it out and I just got it today. Install is this friday along w/ a BMR strut tower brace & Yokohama A048 tires. I'll let you know 
Joined
·
178 Posts
I have 900 HP BMR steel one piece drive shaft for sale if anyone is interested, Email me at [email protected]
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Differential Growl / Clunk when turning
Drive train, suspension, alignment and brakes.Okay fokes I posted a thread last week seeking assistance to locate a new ring and pinion set for my car as the pinion decided it was done. I bought a new ring / pinion / master rebuild kit from 1320 engineering Chris is his name, nice guy btw! I had the local Chevrolet dealership do the...- 9
- 3K
-
ATF leak on '69 GTO
Drive train, suspension, alignment and brakes.This will be a bit of a long post, so please bear with me. I have a frustrating auto trans fluid leak in my 1969 GTO. This is a driver-quality, numbers matching car with a factory turbo 400 trans. I bought it earlier this year (see pictures below). The transmission shifts perfectly. About a...- 15
- 503
-
Diagnosing a noise in my 65 Goat
Drive train, suspension, alignment and brakes.Bought my 65 in 2011. A 10 year frame-off resto had been completed in 1998. About a month ago, I started to notice a rotational noise that seemed to be coming from the left front. Sounded like a wheel bearing. Pulled the bearing and examined it. Bearing - less than a year old - was fine. Noise...- 15
- 955
-
Pedders suspension
Drive train, suspension, alignment and brakes.I recently picked up a 05 gto and the previous owner lowered it with pedders springs and shocks and struts. The only number I found is a sticker on the rear spring . He put the x-low spring in so I'm guessing he did the same in the front. My question can I just put pedders stock height springs...- 1
- 227
-
Joe DiFranco · updated
-
Urgent!!! Can't find OEM size wheel studs that fit?!
Drive train, suspension, alignment and brakes.Hello guys, I'm dealing with a situation that has turned into a nightmare for me. I just did my front brakes, prior to this I hadn't had the front wheels off and found out that one stud was stripped. I checked online with a few of the major parts stores and started my search. I ended up going...- 5
- 370
Join now to ask and comment!