Pontiac GTO Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hello all,
i have a 69 GTO convertible that I've just replaced the body bushings with a stock set from resto parts/ OPG, i was ablate remove all but 2 bushing bolts that required meet cut the old cage nut out. I've replaced the cage nuts and have all the bolts back in torqued at a nominal 25 ftlb, but i have not found what the recommended torque is for them. the assembly manual for 69 says 25-45 ftlbs but I've found nothing more specific than that.
info greatly appreciated.
 
1 - 2 of 2 Posts
Top