Pontiac GTO Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
244 Posts
Discussion Starter #1
Finally the goat has returned to the streets after blowing the engine couple months ago finally got it running again so nice to take it for a ride now maybe i can get to a club event as long as i am not working.


kenny
 

·
Registered
Joined
·
244 Posts
Discussion Starter #3
gto on the road again

Well i took the roller cam out and made the car more streetable i put a hydraulic cam back in so i can drive the car car was making over 721 hp now around 600 hp more streetable.
 

·
Registered
Joined
·
244 Posts
Discussion Starter #6
gto motor spec

Well i will look for the dyno sheet it was from when it had over 721 hp not new one.Engine builder we guess lost about 125hp or so.

1970 455 4 bolt main
eldebrock heads flowing 320 fully ported and polished,ferra racing valves
hydr cam 612/615 292/292 at .50
oliver rods
jbp pistons motor is .030
billet crank
victor jr intake match ported and polished.
1050 dom carb.
march pullies
turbo 400 with 4500 stall
12 bolt rear 3:73 gears auburn center section and strange axles.
Car is mini tubbed.

Anyother questions dont hesitate to ask.
 
1 - 8 of 8 Posts
Top