Pontiac GTO Forum banner

1 - 1 of 1 Posts

73 Posts
Discussion Starter #1
I've seen the thread that has this info for a 66, that it's
60% satin black, but I wanted to be sure it's the same
for a 65. Eastwood is the company everyone suggests using.
Sandblasted the firewall yesterday. Someone suggested
using a self etching primer first as well.
Can someone confirm this for me?
I wanted to also get feedback about the adhesive
that's on the firewall at the seams. It's in good shape,
should I leave it, or blast it away and redo it?
I'm leaning toward leaving it, but always like to hear
all of your input.
1 - 1 of 1 Posts