Electric Cut-outs: Pro's & Con's????
Join the discussion
Recommended Reading
-
Check engine light
Service, Maintenance and Technical DiscussionCheck engine light is on got back p0141 p0155 p0300 and p0154,I replaced the o2 sensors not to long ago as well as spark plugs and wires- 1
- 159
-
Car Parts | Buy And Sell Car Parts
Service, Maintenance and Technical DiscussionHolden Trax for Wrecking Call For Parts Holden Trax for Wrecking Call For Parts Anything Holden Late Model Spicialist! Date Listed:27/03/2020 Last Edited:27/03/2020 Make:Holden Warranty:yes Condition:used | Visit us at - Buy And Sell Car Parts- 0
- 52
-
carpartau · updated
-
Coolant temperature sensor
Service, Maintenance and Technical DiscussionJust changed my coolant temp sensor now my car runs hot and radiator fans stay on, could it be a bad sensor?- 0
- 148
-
Front spindle tight
Service, Maintenance and Technical DiscussionI installed new tubular front control arms. Torqued the upper ball joint to spindle nut to 65 ft lb. the bottom to 90 ft lb. the spindle is so tight I can nearly move it. After speaking with the supplier they said to loosen the castle nut. This I did on the bottom a arm and could then move the...- 2
- 122
-
Blinker Bulb remains on after the indicator flash shows the car is locked.
Service, Maintenance and Technical DiscussionYesterday I washed my goat, and after it sat in the hot sun for a little while, I noticed some moisture in the driver side tail light. I went to lock the car up, and the driver side blinker light flashed like normal to indicate that it was locked. Instead of going back out, the bulb stayed on. I...- 8
- 364
-
Greenman96 · updated
Join now to ask and comment!