I've seen several posts here and on other forums where the LS6 cam/cylinder head installation was done by a dealer for around $2k. If you look on the lingenfelter site it looks like they want $6k. Are you paying a big premium for the name? Any thoughts?
engine modification value
Join the discussion
Recommended Reading
-
Power to distributor Issue
Service, Maintenance and Technical DiscussionI have a 70 GTO I have been working on and have been trouble shooting electrical problems. The issue I have is no power to the distributor coil when I turn the key to the on position, the car will crank but no spark. When I turn the ignition to the off position it will give a spark. So if I...- 6
- 134
-
Check engine light on
Service, Maintenance and Technical DiscussionGetting a p0300 code and all four o2 sensor codes, what should I check? Recently changed spark plugs/wires, Maf senor- 1
- 114
-
Coolant temperature sensor
Service, Maintenance and Technical DiscussionJust changed my coolant temp sensor now my car runs hot and radiator fans stay on, could it be a bad sensor?- 1
- 200
-
Check engine light
Service, Maintenance and Technical DiscussionCheck engine light is on got back p0141 p0155 p0300 and p0154,I replaced the o2 sensors not to long ago as well as spark plugs and wires- 1
- 168
-
Car Parts | Wrecking Yards Melbourne
Service, Maintenance and Technical DiscussionHOLDEN COLORADO ENGINE 06/2013 45,000KMMISSING INJECTORS CALL RON 0409308218 168 NORTHBOURNE ROAD CAMPBELLFIELD 3061 Date Listed:31/03/2020 Last Edited:23/04/2020 Make:Holden Warranty:available Condition:used | Visit us at - Car Parts- 0
- 8
-
carpartau · updated
Join now to ask and comment!