Pontiac GTO Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
214 Posts
It is attached with 3 rivets, so all you have to do is take off your plate to see the rivets (they are black) and drill out the center of each with a small diameter drill bit. After drilling, grab both side of the bracket and pull firmly towards yourself. Bracket will come right off.
 
G

·
big_mike said:
two hands, a cold beer, lots of cursing, and a good swift pull !!!

(kidding!)

DANGGIIT !!! I had to pull so hard for it to come off !!! .....
now I need some info on how to put my front bumper back on...
(hahaha) :willy: :party:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top