Pontiac GTO Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
259 Posts
Discussion Starter · #3 · (Edited)
I did a write up here GMM vs. B&M.

The noise of the GMM was a little too loud for me. So I cut and installed an old piece of "inner-tube rubber" from my daughters bicycle between the shifter handle and the actual shifter assembly mount (where the 2-bolts are).

And it is actually quieter than stock, and shifts like a supercar.:party:
 

·
Registered
Joined
·
2,473 Posts
LS2FAST said:
I did a write up here GMM vs. B&M.

The noise of the GMM was a little too loud for me. So I cut and installed an old piece of "inner-tube rubber" from my daughters bicycle between the shifter handle and the actual shifter assembly mount (where the 2-bolts are).

And it is actually quieter than stock, and shifts like a supercar.:party:

Excellent.

OK...next mod will be pitching the PoS B&M...
 

·
Registered
Joined
·
259 Posts
Discussion Starter · #6 ·
my next mod is the Monaro or VXR front bumber. I am not sure if I want to buy the light assy. for the VXR.... but I just may.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top