HEY is it MAXHAX Sorry about the reply on the wheels
1 - 7 of 7 Posts
I have been busy with my mom in the hospital was up all night in a bedside chair) while trying to pack my stuff to move from a divorce (good riddance)
so what did I miss? Seeing my name in a subject title got my attention but don't delete this forum whoever you are and especially not using my good name lol. :cheers
so what did I miss? Seeing my name in a subject title got my attention but don't delete this forum whoever you are and especially not using my good name lol. :cheers
Thanks about my mom,
The 6 litre over the 5.7 litre?
If you have what you have now make it faster and enjoy it!
If you haven't bought yet then wait and get the LS2 no question about it but it will be a long wait to get the good price that we are geeting on the 04's.
My car is fast enough, I could do heads and cams if I were rich.
If only.....
The 6 litre over the 5.7 litre?
If you have what you have now make it faster and enjoy it!
If you haven't bought yet then wait and get the LS2 no question about it but it will be a long wait to get the good price that we are geeting on the 04's.
My car is fast enough, I could do heads and cams if I were rich.
If only.....
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
1968 blown head gasket.
Service, Maintenance and Technical DiscussionHello everyone! I have a 1968 Pontiac GTO with a blown head gasket. The intake manifold is a 6 pack I like your opinion if I should change it back to the single intake manifold with a 4 bbl carb? I mean it's nice to have a 6 pack but I need all that power. I need to know what I should do. even...- 7
- 479
-
Fijilink2024 · updated
-
BCM Wiring Harness Chafing
Service, Maintenance and Technical DiscussionChecking to make sure your BCM wiring harness is not chafing: If one removes the glove box, the BCM is visible behind and up to the left under the dash. Behind the glove box once it's removed you will see a metal bracket that runs parallel to the dash with a notch cut out on the right side...- 8
- 17K
-
GTO JUDGE · updated
-
2004 Welded on door hinges need aligned
Service, Maintenance and Technical DiscussionNeed to a line the doors they are lose in the welded on Hinges is there a bushing kit, mod or any documentation that any one knows off that can help me with these welded on GTO 2004 hinges to help line the doors up .- 0
- 56
-
Cudinc · updated
-
Coolant leak
Service, Maintenance and Technical DiscussionHi all, just got home from work last night, put the goat in the garage shut it off, went to go inside and heard bubbling sounds from radiator!!! 2 secs. later coolant starting coming out on the floor on the front driver side of car. Started car and pulled back out of garage to let car cool down...- 19
- 4K
-
ABS Fault
Service, Maintenance and Technical DiscussionWe had some snow today and the traction control went off a couple times while taking off from a stop. Nothing out of the normal and this was with 2nd gear or even 3rd gear rolling stops. When I was almost home, the traction control kicked in again and then an ABS Fault warning came up on the...- 6
- 5K
Join now to ask and comment!