Pontiac GTO Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
HI,

I am new to the forum, I came from transamcountry.com


I have a 67 conv with a 400 4 speed, bought for my 35th bday present to myself....

tiem to ressurect it from storage....


what type of motor mounts and tx mounts should I use.....I would like to have it set up right.....

urathane prolly, but where do I get them?


thanks for the help


al
 

·
Registered
Joined
·
453 Posts
I've had poor results with the urethane mounts. Poor durability, and no performance gain to go along with more vibration and discomfort. For this reason, I've been running stock replacement motor and tranny mounts on all the street cars I've been building, and these hold up very well, even with very high torque engines. You can get excellent quality stock replacement mounts from NAPA - no need to go to a restoration parts supplier.
 

·
Registered
Joined
·
1,116 Posts
I agree with Lars. I used always go to the catalog first. Then a buddy told me to check with NAPA first. I have since then always went to NAPA first and parts are cheaper and do fit and work well.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top