Pontiac GTO Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter · #1 ·
I have 12 inch wide tires on 18 " wheels on the rear of my car,to fit the tires I now need to roll the fenders, does anyone here knows of a good do it yourself method, like using a baseball bat and pushing up between tire and fender?
 

·
Registered
Joined
·
186 Posts

·
Registered
Joined
·
15 Posts
Paint won't crack if you're careful...I did it with a fender roller and heat gun and no cracking.
 

·
Registered
Joined
·
29 Posts
Was careful and still cracked paint and rubbed where the fender and bumper meet on the drivers side rearend sticks out further on the drivers side on all goats so i bought the stiffer springs and got rid of the sagging rear
 

·
Registered
Joined
·
304 Posts
MARS said:
What brand of springs did you buy? Did they lower the car? Thanks.
Since I already have the Pedders Street II conversion I'm going to change out the OEM height springs with their plus one inch on the fronts and plus 1.5 inch on the rears. My 17" tires never rubbed but since I've had to go to 18" I'm getting some rubbing over bumps........can't have that.

JET
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top