Pontiac GTO Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Ive got an LS1 f-body, and I recently purchased an LS2 crate engine. The LS1 PCV goes from valve cover to valve cover, however the LS2 has only one connection, on the drivers side valve cover. Anyone know what connects to that male connector on the rear of the passenger side valve cover? Thanks in advance,
John
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
I have a small pipe connecting my passenger valve cover vent to the intake tube between the throttle body and the MAF sensor.
Wow I completely missed that hose. Thanks. I took some pics of all of them:

Here is the one on the back of the drivers side valve cover, that I need to know where it goes on the LS2 setup:


here is the one on the front, that I can now see/understand goes to fresh air in front of the throttle body.

and here is the LS1 pcv setup:



Thanks for all the help thus far.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
The item circled in the first picture is covered with a rubber boot and does not connect to anything.
Thanks thats what I needed to know. The other one that goes to the intake elbow, on an fbody connects to the throttle body, so thats taken care of too. Thanks again
 
1 - 5 of 5 Posts
Top