Pontiac GTO Forum banner

1 - 5 of 5 Posts

·
RIP (12/27/60-7/18/15)
Joined
·
767 Posts
Discussion Starter #1
I'm painting the core support with GM Satin Black spray paint.
I wire wheeled it real good and swiped the surfaces with acetone.
Yet on the back side, it seems that the paint,when dry, looks like it's flat black in some spots.
even when given another coat , parts still loook flat.
Have you guys ever heard of such a thing?:confused
 

·
Registered
Joined
·
546 Posts
when you dont put the paint on heavy enough. Or your using to much air instead of paint. If your using aerosol cans it happens sometimes if the can is not held relatively straight up and down. Just make sure you put your last coat of paint on pretty heavy but not enough to run. Sometimes holding a rattle can closer to the object while painting will yeild more shine.
 
1 - 5 of 5 Posts
Top