Pontiac GTO Forum banner

paint looks weird

1K views 4 replies 3 participants last post by  Rukee 
#1 ·
I'm painting the core support with GM Satin Black spray paint.
I wire wheeled it real good and swiped the surfaces with acetone.
Yet on the back side, it seems that the paint,when dry, looks like it's flat black in some spots.
even when given another coat , parts still loook flat.
Have you guys ever heard of such a thing?:confused
 
#4 ·
when you dont put the paint on heavy enough. Or your using to much air instead of paint. If your using aerosol cans it happens sometimes if the can is not held relatively straight up and down. Just make sure you put your last coat of paint on pretty heavy but not enough to run. Sometimes holding a rattle can closer to the object while painting will yeild more shine.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top