ripshifter correct reverse entry problem?
Join the discussion
Recommended Reading
-
Manual transmission cross member
Drive train, suspension, alignment and brakes.1967 GTO with muncie 4 spd. I bought a used cross member i dont know if its the wrong one it puts the transmission to high and drive shaft hits. Is there away to tell if i have the wrong one ? Will a chevelle cross member work? Or does it have to be a Pontiac one?- 3
- 406
-
67 pontiac lemans air shocks
Drive train, suspension, alignment and brakes.I have a 1967 pontiac lemans that originally had an inline 6 ohc, but now has a 389 bored over 60. The car has gabriel hijacker air shocks that are bad and am looking to buy the same thing. The two that fit my car have a light duty and heavy duty suspension, but I'm not sure which one I need. So...- 3
- 134
-
Jbozarth · updated
-
67 pontiac lemans air shocks
Drive train, suspension, alignment and brakes.I have a 1967 pontiac lemans that originally had an inline 6 ohc, but now has a 389 bored over 60. The car has gabriel hijacker air shocks that are bad and am looking to buy the same thing. The two that fit my car have a light duty and heavy duty suspension, but I'm not sure which one I need. So...- 0
- 67
-
Jbozarth · updated
-
GTO TR6060 crossmember
Drive train, suspension, alignment and brakes.Is anyone making an aftermarket cross member for the 2004-06 GTOs? Doing an LS3/TR6060 swap and I'm looking for a beefier cross member that's meant for the 1' longer trans. If not I'll make one, but hey, why reinvent the wheel!?- 0
- 121
-
Drive shaft spins but doesn’t move
Drive train, suspension, alignment and brakes.Idk if it’s my diff or drive shaft or joints- 2
- 250
Join now to ask and comment!