Pontiac GTO Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,100 Posts
Can't speak for the 05 -- but my 04 shaft is NOT threaded. It's simply a pressure fitting.

BTW, when you put your new knob on -- run a piece of electrical tape up one side of the shaft, over the top, and down the other -- prevents the dreaded "shifter knob rattle."
 

·
Registered
Joined
·
381 Posts
Discussion Starter · #3 ·
b_a_betterperson said:
Can't speak for the 05 -- but my 04 shaft is NOT threaded. It's simply a pressure fitting.

BTW, when you put your new knob on -- run a piece of electrical tape up one side of the shaft, over the top, and down the other -- prevents the dreaded "shifter knob rattle."

thanks for your response, and dang that rattle..... you know i hate em
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top