Pontiac GTO Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Hello, I have a 66 tempest 4 door and wanted to know what anyone is using for door panel replacements? I can't find anyone selling them online. If I can't find any I will make my own but figure I'd give this a shot first. Thanks in advance!
 

·
Registered
Joined
·
1,021 Posts
Hello

welcome.......
is it a 4 door hard top ? no post

or

a 4 door sedan with frames around the windows....
fairly sure the upper edges and upper corners are different....

If its a sedan ,,,, wagon should work also ....

someone will chime in with positive info for you....

Scott
 

·
Registered
Joined
·
22 Posts
Discussion Starter #3
Hey Scott thanks for the reply. It's a 4 door hardtop no post. I just assumed the post, non post and wagon doors were the same.
 

·
Registered
Joined
·
1,611 Posts
The only viable source is nice used 4 door hardtop doorpanels. Have to have your ear to the ground with those of us that haul in quite a few partscars. About 3 years ago, a really good friend & fellow collector/vendor in MN had a really cherry set of 4. Know I cked out the 66 4 door hardtop while I was up that way, & he sold them within a few months
 
1 - 5 of 5 Posts
Top