Pontiac GTO Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter #1 (Edited)
Hi,

I can't figure out how to make the snap on Pontiac horn emblem snaps on (3 snaps) in the straight up position when car is straight ahead. It seems to be made to be off set to the left and there's no way around it. Anyone experience this. It's the tan wheel on 3 supports on my 68 LeMans.
I figure the the caps symbol should be half way vertical between the "spokes"?

Thanks!:frown3:
 

·
Registered
Joined
·
103 Posts
Discussion Starter #3
on a 68 woodie ?? or sport wheel
Yes, just like the one in your picture thanks Judge! I think I figured it out. After looking closely the horn emblem's glue had detached, and I think it moved over time!

Any suggestions as to what glue won't etch the underside of the emblem?
 

·
Registered
Joined
·
417 Posts
Yes, just like the one in your picture thanks Judge! I think I figured it out. After looking closely the horn emblem's glue had detached, and I think it moved over time!

Any suggestions as to what glue won't etch the underside of the emblem?
Maybe liquid nail for mirrors. No guarantees tho.
 
1 - 6 of 6 Posts
Top