Pontiac GTO Forum banner
1 - 1 of 1 Posts

· Registered
22 Posts
Discussion Starter · #1 ·
Looking for info on rather the TC switch goes to an input on the BCM module or rather to it's own controller, and either way if anyone knows which wire it is, please let me know. I've made a very small circuit to make the TC default off as soon as you start the car, but I would rather install it near the BCM if possible instead of under the center console where i've been experimenting with it. Thanks in advance for any info !!!!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.