Pontiac GTO Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
Ok i got a 455 borded .30 over with forged rods and pistons with msd full kit. Well the 191 heads are junk i also need a new intake its the original and a new carb. What kind of heads intake carb and cam should i get to reach my goal. This being a street car to not making a race car.

Mods so far: brand new 3.73 gearing posi, full msd kit, forged rods and pistons, And 3 1/2 inch flowmaster exhaust.

Thanks
 

·
Registered
Joined
·
53 Posts
Discussion Starter #6
Long story one day he came to my house and ran over my cat while dropping off my computer so....... i grabbed him by the neck and punched his so many times in the face cause my mom was crying her favorit cat died. could i fed x?
 

·
Registered
Joined
·
22 Posts
Kauffman Racing Equipment (KRE), KRE's D-port heads, 74cc 340-cfm versions to keep compression pump-gas friendly at 11.4:1 while still providing enough airflow to produce 600-plus hp.
4.210-inch stroke crank. Aluminum rods, BME aluminum rods and SRP forged pistons
stout Comp roller cam
Holley 1050 Dominator
Victor intake.

Engine Buildup Worksheet
Engine Displacement 463
Horsepower 650
Torque 596 lb-ft
Bore/Stroke 4.185/4.21-in
 
1 - 8 of 8 Posts
Top