Pontiac GTO Forum banner
1 - 3 of 3 Posts

· Registered
104 Posts
Discussion Starter · #1 ·
I changed the engine oil and filter twice in my 05 QSM. This first time I refilled with the specified 6.5 quarts. Started and ran the engine. Stopped the engine and parked on a level surface, the oil level read over full, up to about the 2nd "S" bend in the dipstick. This last change with filter, I did the same time, except used 6.0 quarts of oil. The oil level still reads over full, about up to the first "S" bend in the dipstick.

What's the real story here? Is the General having us overfill our engines because of potential oil consumption problems?

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.