Pontiac GTO Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
I own a manual '04, Puse Red. I took it out to our local drag way last night, and was kind of disapointed on how much wheel hop this car has. If you lay of the gas a little it doesnt hop to bad, but wont launch as hard. Does anyone know of any mods for the frame to help out? I have checked BMR's website and found nothing. How about better tires that stick, Nitto? Any one has some feed back.
 

·
Registered
Joined
·
3,541 Posts
Legionaire is right and you'll also need a BMR mount, someone told me they make polyurethane bushings for the rear!?! If you can find all three (I stock the mount and the sway bar & end links, just need the poly bushings) then it should eliminate the majority! BTW Nitto's hurt more than help(on hop,w/o mods) :cheers
 

·
Registered
Joined
·
3,541 Posts
good point, I forgot about our rubber jointed 2 piece "driveshafts", I swear that is the worse design ever!(my pinion on rubber u joints.. :willy: ) :cheers
 
1 - 9 of 9 Posts
Top