Will these headers fit
1 - 6 of 6 Posts
Nah, dont think so.ohnogto said:will a set of headers for a 98 up camaro or trans am with the ls1 fit on my 04 gto? If so do you suggest full length or shorties ?arty:
You gotta get sum them thar expesive custom jobs.
Always go with the long tubes...they make the most power.
Go with Kooks or Stainless Works......worth every penny.
Bill
Joined
·
1 Posts
They will not fit the GTO, you will need specific ones for our cars.
ok, thanks ! I have looked at kooks and stainless works. They are pretty steep, but if your gonna do it. Mind as well do it right.
I also plan on running 3 in exhaust and taking off the cats. How can i fabricate a place for my oxygen sensor or do they make any headers that has the o2 sensor adaptor. I also plan on putting a set of flwmaster super 40's to top it off.
I also plan on running 3 in exhaust and taking off the cats. How can i fabricate a place for my oxygen sensor or do they make any headers that has the o2 sensor adaptor. I also plan on putting a set of flwmaster super 40's to top it off.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Switch above the radio
Service, Maintenance and Technical DiscussionI recently acquired an all original 1968 GTO, my first GTO. Can anyone tell me what this switch is?- 9
- 353
-
68 400 YS code Temp sending unit
Service, Maintenance and Technical DiscussionCan anyone tell me if the sensor I have circled in the picture is the temp sending unit for temp idiot light on a 68 GTO. The light does not come on when I turn the ignition key like the “gen” and “oil” lights do so I want to make sure it’s working. If that’s it, any advice on testing it?- 0
- 59
-
Transmission
Service, Maintenance and Technical DiscussionI was driving and all of a sudden it just stopped pulling and now it won’t do nothing in any gear not even reverse but whine what could it be the driveshaft is still intact- 4
- 165
-
Brake sticking?
Service, Maintenance and Technical DiscussionI have 04 that pulls hard left when stopping. After I stop and before I accelerate ill release off of the brake pedal and I feel a thud in the steering wheel.- 0
- 135
-
gto key wont turn
Service, Maintenance and Technical Discussion2005 gto key physically won't turn , I ordered the new revised cylinder , but in order to remove the old cylinder you need to turn the key to on position ,then push the the little button with the Allen wrench ,what do I do ,my steering wheel is also locked- 5
- 1K
Join now to ask and comment!