Pontiac GTO Forum banner

1 - 1 of 1 Posts

36 Posts
Discussion Starter #1
1965 GTO Restoration

I have a brand new 2-speed motor hanging on the firewall (even checked out the serial number with Ames to make sure I didn't get robbed) and have found out that the S.O.B. that worked on my car instead of using the 2-speed switch I bought to replace the old single speed switch, stole the switch and took my brand new Auto Wire wiring harness and wired it to run off that old single speed switch.

Now I have discovered all this and the 50 year old switch needs to go and I've got another 2-speed switch but its this wiring where he has it just going to the first 2 prongs.

I've got to tear the dash out now to see what's going on but where is the 3-prong wire that should be running from that switch in that wiring harness.

1 - 1 of 1 Posts