wtb: 350 block
Join the discussion
Recommended Reading
-
69 Ram Air Hood Pan
1964-1974 Tempest, Lemans & GTO General DiscussionDoes anyone have a good diagram of where the bolts go that hold the upper hood pan? I saw a previous thread from 2010 but I did not see any diagrams. I have a general idea of where it goes, but it doesn't seem to sit naturally anywhere and I want to get this right. I know the bracing needs to...- 12
- 109
-
leeps · updated
-
They MADE Me Drive It
1964-1974 Tempest, Lemans & GTO General DiscussionE-head 468, HR cam, T-400 and Gear Vendor OD, 3.73 Posi, dual quads, Doug's Headers, AC, PS, PB, stereo. Someone had to do it.- 3
- 187
-
Old Man Taylor · updated
-
1964 GTO sitting for a long time
1964-1974 Tempest, Lemans & GTO General DiscussionHello, I have a restored '64, modified with a 455 +.040, tri-power, 4-speed. Do I need to be concerned about the fuel sitting in the front & rear carbs' float bowls, which don't usually do anything except when I blow her out from time to time? I am lucky to have a gas station nearby where I...- 11
- 404
-
hard lines for front disc conversion 1966 GTO
1964-1974 Tempest, Lemans & GTO General DiscussionHaven't posted in a long time, but just got around to wrenching on my '66 after a long hiatus. The stock rear control arms were bent, so got tubular uppers and lowers with a swaybar, that led to new springs and shocks, which prompted me to pay attention to the front end for new springs and...- 12
- 374
-
ylwgto · updated
-
1965 gto tire size?
1964-1974 Tempest, Lemans & GTO General DiscussionHello, I’m doing 4 wheel disc conversion and need to switch to 15” wheels. I Bought rims already only not sure of tire size to go with?225/60r15 sound right? thanks joe- 13
- 552
Join now to ask and comment!